- Area
- South Yorkshire
- Postcode district
- S1
- Nation
- England
- Guide price
- From £9,200 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing a gas boiler with a heat pump in Sheffield
Most homes can run on a heat pump if the system is designed properly, and Sheffield is no different. The key is matching the heat pump and radiators to the home's heat loss.
Semi-detached and terraced houses in Sheffield often have an airing cupboard that can be reused for a heat pump cylinder. If your Sheffield home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Boilers that are old, unreliable or due for replacement
- Combi owners who can find space for a hot water cylinder
What's included
- Free survey with heat loss calculation and cylinder siting
- Removal of the gas boiler, flue and any loft tanks
- Capping of the gas pipe at the boiler position where you are giving up gas
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Heat pump cylinder, outdoor unit and weather compensation controls
Many gas-heated homes in Sheffield have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Sheffield quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for replacing a gas boiler with a heat pump in Sheffield
The ranges below are typical installed prices for homes in South Yorkshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Sheffield can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £1,700–£4,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £2,700–£5,600 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £4,150–£7,550 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £6,100–£9,950 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £8,500–£14,350 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Sheffield
Sheffield has about 7 hours 29 minutes of daylight at midwinter and 17 hours 01 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
What happens after you enquire in Sheffield?
- Start online with a guide price or call us.
- A home survey in Sheffield gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing a gas boiler with a heat pump in Sheffield: questions
How soon can you survey a home in Sheffield?
Survey dates depend on how busy installers are in South Yorkshire. We offer the next available dates when you enquire and confirm them in writing.
Can you service a heat pump in Sheffield that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Sheffield, whoever fitted them. Tell us the make and model when you book.
Do you cover Rotherham as well as Sheffield?
Yes. We arrange surveys and installation in Rotherham, which is about 6 miles north-east of Sheffield, and across South Yorkshire.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.