- Area
- West Midlands
- Postcode district
- WV14
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump in Bilston: what to expect
Homes around Bilston range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
If your Bilston home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob. Semi-detached and terraced houses in Bilston often have an airing cupboard that can be reused for a heat pump cylinder.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- System or regular boiler homes with an existing airing cupboard
- Boilers that are old, unreliable or due for replacement
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Removal of the gas boiler, flue and any loft tanks
- Heat pump cylinder, outdoor unit and weather compensation controls
- Capping of the gas pipe at the boiler position where you are giving up gas
- System flush and radiator upgrades where the design calls for them
- Free survey with heat loss calculation and cylinder siting
Rear gardens and side returns in Bilston usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Bilston quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Gas boiler to heat pump costs around Bilston
Here are typical prices for replacing a gas boiler with a heat pump in the West Midlands, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Bilston?
On the shortest day Bilston gets about 7 hours 38 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
What happens after you enquire in Bilston?
- Start online with a guide price or call us.
- A home survey in Bilston gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing a gas boiler with a heat pump in Bilston: questions
Do you cover Willenhall as well as Bilston?
Yes. We arrange surveys and installation in Willenhall, which is about a mile north of Bilston, and across the West Midlands.
How long does installation take in Bilston?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Bilston home states the expected time.
How soon can you survey a home in Bilston?
Survey dates depend on how busy installers are in the West Midlands. We offer the next available dates when you enquire and confirm them in writing.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
Is there a grant to replace a gas boiler with a heat pump?
In England and Wales, the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump that replaces a gas boiler, for eligible owners of existing homes. The MCS-certified installer applies to Ofgem and deducts the grant from your quote, and Ofgem contacts you to confirm. Scotland has separate Home Energy Scotland funding, and Northern Ireland has no dedicated homeowner grant at present.