- Area
- West Midlands
- Postcode district
- DY6
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump in Kingswinford: what to expect
Homes around Kingswinford range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Many gas-heated homes in Kingswinford have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder. Installers in Kingswinford take out the old boiler and flue and seal the wall opening as part of the job.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Boilers that are old, unreliable or due for replacement
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- System or regular boiler homes with an existing airing cupboard
What's included
- Free survey with heat loss calculation and cylinder siting
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Heat pump cylinder, outdoor unit and weather compensation controls
- Removal of the gas boiler, flue and any loft tanks
- Capping of the gas pipe at the boiler position where you are giving up gas
Households across the West Midlands moving off gas can have a survey in Kingswinford that compares running costs on realistic assumptions.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Kingswinford quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Gas boiler to heat pump costs around Kingswinford
Guide prices for Kingswinford and the rest of the West Midlands are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Kingswinford?
Kingswinford has about 7 hours 39 minutes of daylight at midwinter and 16 hours 50 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
What happens after you enquire in Kingswinford?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Kingswinford home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Kingswinford: questions
How long does a heat pump survey take in Kingswinford?
A home survey in Kingswinford usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Kingswinford house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Kingswinford home.
Do I need new radiators for a heat pump in Kingswinford?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Kingswinford home gives a room-by-room list.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
Is there a grant to replace a gas boiler with a heat pump?
In England and Wales, the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump that replaces a gas boiler, for eligible owners of existing homes. The MCS-certified installer applies to Ofgem and deducts the grant from your quote, and Ofgem contacts you to confirm. Scotland has separate Home Energy Scotland funding, and Northern Ireland has no dedicated homeowner grant at present.