- Area
- Aberdeenshire and Moray
- Postcode district
- AB31
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
What to know about heat loss surveys in Banchory
A heat pump suits most Banchory homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Homeowners in Banchory thinking about insulation work can use the survey to see how it would change their heat pump size. For Banchory homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Landlords comparing properties before deciding where to switch first
- Homes with an existing heat pump that seems undersized or expensive to run
- Anyone getting a heat pump quote, as the first step
What's included
- Written results in your quote, or a stand-alone report if you order one
- Radiator schedule with any upgrades needed for each room
- Recommended heat pump size and design flow temperature
- Outdoor unit siting options and noise check
- Room-by-room heat loss calculation using the MCS method
Houses in Banchory built in different eras can need very different heat pump sizes, which is why each is calculated room by room.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Banchory can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
What to budget for heat loss surveys in Banchory
Here are typical prices for heat loss surveys in Aberdeenshire and Moray, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£410 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Winter daylight and heating in Banchory
Banchory has about 6 hours 42 minutes of daylight at midwinter against 17 hours 54 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
What happens after you enquire in Banchory?
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Banchory; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat loss surveys in Banchory: questions
What size heat pump does a Banchory home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Banchory home.
How long does installation take in Banchory?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Banchory home states the expected time.
Do you cover Westhill as well as Banchory?
Yes. We arrange surveys and installation in Westhill, which is about 10 miles north-east of Banchory, and across Aberdeenshire and Moray.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
Why can't you size the heat pump from my boiler?
Boilers are often much larger than a home's real heat loss, because they are sized for fast hot water and quick warm-ups. Matching a heat pump to the boiler's output usually means an oversized unit that costs more and switches on and off too often. A room-by-room calculation finds the actual heat demand, which is what the heat pump needs to meet.