- Area
- Angus and Dundee
- Postcode district
- DD5
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
What to know about heat loss surveys in Monifieth
Most homes can run on a heat pump if the system is designed properly, and Monifieth is no different. The key is matching the heat pump and radiators to the home's heat loss.
Homeowners in Monifieth thinking about insulation work can use the survey to see how it would change their heat pump size. The survey in Monifieth includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Anyone getting a heat pump quote, as the first step
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Landlords comparing properties before deciding where to switch first
What's included
- Recommended heat pump size and design flow temperature
- Room-by-room heat loss calculation using the MCS method
- Electrical supply and network operator notes
- Hot water cylinder sizing for your household
- Radiator schedule with any upgrades needed for each room
Houses in Monifieth built in different eras can need very different heat pump sizes, which is why each is calculated room by room.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Monifieth home, apply and receive the written offer before the installation date is fixed.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
What to budget for heat loss surveys in Monifieth
Here are typical prices for heat loss surveys in Angus and Dundee, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Designing for Monifieth's winters
Monifieth has about 6 hours 50 minutes of daylight at midwinter against 17 hours 45 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
From survey to switch-on in Monifieth
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Monifieth home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Monifieth: questions
How long does installation take in Monifieth?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Monifieth home states the expected time.
Where would the outdoor unit go on a Monifieth house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Monifieth home.
What size heat pump does a Monifieth home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Monifieth home.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.