- Area
- Stirling, Falkirk and Clackmannanshire
- Postcode district
- FK5
- Nation
- Scotland
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey in Larbert: what to expect
Most homes can run on a heat pump if the system is designed properly, and Larbert is no different. The key is matching the heat pump and radiators to the home's heat loss.
Houses in Larbert built in different eras can need very different heat pump sizes, which is why each is calculated room by room. A surveyor visits your Larbert home to measure each room, window and wall before any heat pump is sized.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Self-builders and architects who need emitter and system sizes early
- Homes with an existing heat pump that seems undersized or expensive to run
- Landlords comparing properties before deciding where to switch first
What's included
- Written results in your quote, or a stand-alone report if you order one
- Radiator schedule with any upgrades needed for each room
- Room-by-room heat loss calculation using the MCS method
- Hot water cylinder sizing for your household
- Recommended heat pump size and design flow temperature
For Larbert homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Larbert home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Larbert property at survey.
What to budget for heat loss surveys in Larbert
The ranges below are typical installed prices for homes in Stirling, Falkirk and Clackmannanshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Larbert can need quite different radiators and pipework.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Designing for Larbert's winters
Larbert has about 6 hours 56 minutes of daylight at midwinter against 17 hours 38 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
From survey to switch-on in Larbert
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Larbert; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat loss surveys in Larbert: questions
How long does a heat pump survey take in Larbert?
A home survey in Larbert usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Larbert house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Larbert home.
How long does installation take in Larbert?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Larbert home states the expected time.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.