- Area
- Kent
- Postcode district
- CT17
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey in Dover: what to expect
A heat pump suits most Dover homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Houses in Dover built in different eras can need very different heat pump sizes, which is why each is calculated room by room. Design outdoor temperatures for Dover and the wider Kent come from local cold-weather data, not a national average.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Self-builders and architects who need emitter and system sizes early
- Anyone getting a heat pump quote, as the first step
What's included
- Written results in your quote, or a stand-alone report if you order one
- Electrical supply and network operator notes
- Room-by-room heat loss calculation using the MCS method
- Outdoor unit siting options and noise check
- Radiator schedule with any upgrades needed for each room
The survey in Dover includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Dover quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat loss survey costs around Dover
The ranges below are typical installed prices for homes in Kent, including VAT. A survey sets the exact figure, because two similar-looking houses in Dover can need quite different radiators and pipework.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£410 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Winter daylight and heating in Dover
Dover sees roughly 7 hours 53 minutes of daylight in late December against 16 hours 34 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
From survey to switch-on in Dover
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Dover home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Dover: questions
How soon can you survey a home in Dover?
Survey dates depend on how busy installers are in Kent. We offer the next available dates when you enquire and confirm them in writing.
Where would the outdoor unit go on a Dover house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Dover home.
Can you service a heat pump in Dover that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Dover, whoever fitted them. Tell us the make and model when you book.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.