- Area
- Staffordshire
- Postcode district
- DE14
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey in Burton upon Trent: what to expect
A heat pump suits most Burton upon Trent homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
The survey in Burton upon Trent includes a check of where the outdoor unit could sit and how its sound would reach neighbours. A surveyor visits your Burton upon Trent home to measure each room, window and wall before any heat pump is sized.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Anyone getting a heat pump quote, as the first step
- Self-builders and architects who need emitter and system sizes early
- Landlords comparing properties before deciding where to switch first
What's included
- Outdoor unit siting options and noise check
- Radiator schedule with any upgrades needed for each room
- Hot water cylinder sizing for your household
- Recommended heat pump size and design flow temperature
- Electrical supply and network operator notes
For Burton upon Trent homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Burton upon Trent quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for heat loss surveys in Burton upon Trent
These are guide prices for Staffordshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Short winter days in Burton upon Trent and what they mean
On the shortest day Burton upon Trent gets about 7 hours 36 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
From survey to switch-on in Burton upon Trent
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Burton upon Trent; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat loss surveys in Burton upon Trent: questions
Can you service a heat pump in Burton upon Trent that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Burton upon Trent, whoever fitted them. Tell us the make and model when you book.
Do I need new radiators for a heat pump in Burton upon Trent?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Burton upon Trent home gives a room-by-room list.
What size heat pump does a Burton upon Trent home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Burton upon Trent home.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.