- Area
- West Midlands
- Postcode district
- B63
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
What to know about heat loss surveys in Halesowen
Every property in Halesowen is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
The survey in Halesowen includes a check of where the outdoor unit could sit and how its sound would reach neighbours. A surveyor visits your Halesowen home to measure each room, window and wall before any heat pump is sized.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Anyone getting a heat pump quote, as the first step
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Homes with an existing heat pump that seems undersized or expensive to run
What's included
- Written results in your quote, or a stand-alone report if you order one
- Outdoor unit siting options and noise check
- Hot water cylinder sizing for your household
- Radiator schedule with any upgrades needed for each room
- Recommended heat pump size and design flow temperature
Houses in Halesowen built in different eras can need very different heat pump sizes, which is why each is calculated room by room.
Grants and rules for heat pumps in England
Homes in Halesowen can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat loss survey prices in Halesowen
Here are typical prices for heat loss surveys in the West Midlands, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
How long is the heating season in Halesowen?
On the shortest day Halesowen gets about 7 hours 40 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
The steps for heat loss surveys in Halesowen
- Start online with a guide price or call us.
- A home survey in Halesowen gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat loss surveys in Halesowen: questions
Do you cover Brierley Hill as well as Halesowen?
Yes. We arrange surveys and installation in Brierley Hill, which is about 4 miles north-west of Halesowen, and across the West Midlands.
How long does installation take in Halesowen?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Halesowen home states the expected time.
Where would the outdoor unit go on a Halesowen house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Halesowen home.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
Why can't you size the heat pump from my boiler?
Boilers are often much larger than a home's real heat loss, because they are sized for fast hot water and quick warm-ups. Matching a heat pump to the boiler's output usually means an oversized unit that costs more and switches on and off too often. A room-by-room calculation finds the actual heat demand, which is what the heat pump needs to meet.