- Area
- Bedfordshire
- Postcode district
- SG18
- Nation
- England
- Main grant
- Boiler Upgrade Scheme, £7,500
- Survey
- Free for installation enquiries
What to know about heat pump grants in Biggleswade
Homes around Biggleswade range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Installation dates in Biggleswade are fixed around any funding confirmation, so work does not start too early. For landlords with property in Biggleswade, we explain the funding position for each home before quoting.
Heat pump funding depends on which UK nation you live in, so we confirm what applies to your home and handle the grant steps alongside your quote.
- Homes in England and Wales on oil or LPG, where a higher grant applies between set dates
- Anyone unsure which scheme applies and wanting it checked before committing
- Homeowners in England and Wales replacing gas, oil, LPG or electric heating
What's included
- Boiler Upgrade Scheme application made by the MCS-certified installer (England and Wales)
- Installation scheduled around your grant confirmation or funding offer
- Written quote showing the full price and any grant deduction
- Eligibility check for the scheme that covers your nation
- MCS certificate and handover documents after installation
Homeowners in Biggleswade get a clear written quote showing the full price and any funding that applies.
Grants and rules for heat pumps in England
Homes in Biggleswade can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Grants and VAT across the UK
| Nation | Main support for heat pumps | Key points |
|---|---|---|
| England | Boiler Upgrade Scheme: £7,500 (£9,000 replacing oil or LPG, 21 July 2026 to 31 March 2027; £2,500 air-to-air) | MCS-certified installer applies; deducted from your quote |
| Wales | Boiler Upgrade Scheme: £7,500 (£9,000 replacing oil or LPG, 21 July 2026 to 31 March 2027) | Same scheme and rules as England |
| Scotland | Home Energy Scotland grant up to £7,500, plus up to £1,500 rural uplift; interest-free loan up to £7,500 | You apply; written offer needed before work starts |
| Northern Ireland | No dedicated heat pump grant for homeowners at present | Some heat pumps funded through NISEP in the past |
Heat pump installation is zero-rated for VAT across the UK, including Northern Ireland, until 31 March 2027. Scheme figures as at October 2026; check gov.uk, Ofgem or Home Energy Scotland before relying on them.
Designing for Biggleswade's winters
Biggleswade has about 7 hours 43 minutes of daylight at midwinter and 16 hours 45 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
The steps for heat pump grants in Biggleswade
- Start online with a guide price or call us.
- A home survey in Biggleswade gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat pump grants in Biggleswade: questions
How long does installation take in Biggleswade?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Biggleswade home states the expected time.
Do I need new radiators for a heat pump in Biggleswade?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Biggleswade home gives a room-by-room list.
How long does a heat pump survey take in Biggleswade?
A home survey in Biggleswade usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I need an EPC for the Boiler Upgrade Scheme?
No longer. Since 28 April 2026, a valid EPC is not required for the Boiler Upgrade Scheme in England and Wales. The system must still meet the home's full heating and hot water needs, which the room-by-room heat loss calculation confirms. The other eligibility rules, such as owning the property, still apply.
Who applies for the Boiler Upgrade Scheme?
In England and Wales, the MCS-certified installer applies to Ofgem for the Boiler Upgrade Scheme on your behalf, and the grant is deducted from your quote. Ofgem then contacts you as the property owner to confirm the details. Your quote names the MCS-certified installer for your job, so you know who is making the application.