Air source heat pumps, surveyed, designed and installed· Free home survey for installation enquiries
0800 088 6341
Heat pump radiators
Scotland · 8 towns

Heat pump radiators in Angus and Dundee

Switching to a heat pump in Angus and Dundee? Start with a guide price, then a surveyor measures your home and the written quote fixes the price.

The good news is that many homes keep most of their existing radiators. Older houses were often fitted with radiators larger than they needed, and rooms that have since been insulated may now need less heat. The only way to know is a room-by-room calculation: the heat loss survey works out how much heat each room loses on a cold day and checks whether the radiator already there can deliver it at the chosen flow temperature.

In Angus and Dundee, bay-windowed front rooms are often the rooms that need a larger radiator when moving to a heat pump. Radiator fitting in Angus and Dundee is scheduled with your heat pump installation so the system is drained only once. Extensions and kitchen-diners around Angus and Dundee with large glazed areas get their own radiator calculation.

Who it suits

  • Homes switching from a gas, oil or LPG boiler to a heat pump
  • Rooms that already feel slow to heat, such as bay-windowed living rooms
  • Homeowners who want the lowest practical flow temperature for efficiency
  • Extensions and loft conversions with large areas of glazing

Grants and rules for heat pumps in Scotland

Scotland

The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Angus and Dundee can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.

There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.

Heat pump radiators prices in Angus and Dundee

Here are typical prices for heat pump radiator upgrades in Angus and Dundee, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.

Heat pump radiators prices in Angus and Dundee
WorkGuide price
Replacement radiator, sized for a heat pump (each, fitted)£250–£450
Upgrade of about 10 radiators£2,000–£5,000
Pipework upgrade (e.g. microbore to larger bore)£1,500–£3,500

Installed, inc VAT. The survey lists which radiators need changing.

Towns we cover in Angus and Dundee

We cover 8 towns in Angus and Dundee for heat pump radiator upgrades. Each links to local guide prices and the grant position for Scotland.

TownPostcode districtNearest townMidwinter daylight
DundeeDD1Monifieth6 h 50 min
ArbroathDD11Carnoustie6 h 49 min
BrechinDD9Montrose6 h 46 min
CarnoustieDD7Monifieth6 h 50 min
ForfarDD8Kirriemuir6 h 48 min
KirriemuirDD8Forfar6 h 47 min
MonifiethDD5Carnoustie6 h 50 min
MontroseDD10Brechin6 h 47 min

Heat pump radiator upgrades questions

Do I need new radiators for a heat pump?

Not necessarily: many homes keep most of their radiators and replace only a few. The heat loss survey checks each room against its existing radiator at the planned flow temperature. Rooms with large windows, high ceilings or extensions are the usual candidates for an upgrade, while bedrooms often need no change. Your radiator schedule lists every decision.

Will new radiators be much bigger than my old ones?

Sometimes, but not always. Swapping a single-panel radiator for a double or triple-panel model of the same height and width can raise output substantially, adding only depth from the wall. Where that is not enough, a longer or taller radiator, or a second radiator in the room, may be needed. We agree sizes and positions with you before anything is ordered.

Can radiators be changed without draining the whole system?

Radiator changes normally mean draining the heating system, which is why they are usually done as part of the heat pump installation. The system is then refilled, flushed, treated with inhibitor and balanced. Doing the radiators at the same time avoids draining twice and means the new radiators are commissioned with the heat pump.

Are fan-assisted radiators noisy?

Fan-assisted radiators make a low, steady fan sound when running at higher output, and many have quieter settings for bedrooms at night. They are useful where wall space is short, such as a kitchen with few clear walls. They need a small electrical supply, which we plan into the installation if you choose them.

Ready to price your heat pump?

Use the guide price tool, or book a free home survey and fixed written quote.

CallGet a quote