- Area
- Fife
- Postcode district
- KY3
- Nation
- Scotland
- Guide price
- From £250 inc VAT
- Survey
- Free for installation enquiries
Heat pump radiators for Burntisland homes
A heat pump suits most Burntisland homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Radiator fitting in Burntisland is scheduled with your heat pump installation so the system is drained only once. Many older houses in Burntisland still have their original single-panel radiators, so the survey checks each one against the room it heats.
We size each radiator to your room-by-room heat loss so a heat pump can heat your home at a low, efficient flow temperature.
- Rooms that already feel slow to heat, such as bay-windowed living rooms
- Homeowners who want the lowest practical flow temperature for efficiency
- Rooms with little wall space, where a fan-assisted radiator fits better
What's included
- Draining, refilling, cleaning and inhibitor treatment of the heating system
- Room-by-room heat loss figures for every heated room
- Supply and fitting of new radiators, valves and brackets
- Balancing every radiator so each room heats evenly
- Pipework checks and any agreed pipe upgrades
In Burntisland, bay-windowed front rooms are often the rooms that need a larger radiator when moving to a heat pump.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Burntisland home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Burntisland property at survey.
Guide prices for heat pump radiator upgrades in Burntisland
The ranges below are typical installed prices for homes in Fife, including VAT. A survey sets the exact figure, because two similar-looking houses in Burntisland can need quite different radiators and pipework.
| Work | Guide price |
|---|---|
| Replacement radiator, sized for a heat pump (each, fitted) | £250–£450 |
| Upgrade of about 10 radiators | £2,000–£5,000 |
| Pipework upgrade (e.g. microbore to larger bore) | £1,500–£3,500 |
Installed, inc VAT. The survey lists which radiators need changing.
How long is the heating season in Burntisland?
On the shortest day Burntisland gets only about 6 hours 56 minutes of daylight, with the sun around 10° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
From survey to switch-on in Burntisland
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Burntisland; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat pump radiator upgrades in Burntisland: questions
What size heat pump does a Burntisland home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Burntisland home.
Do I need new radiators for a heat pump in Burntisland?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Burntisland home gives a room-by-room list.
Where would the outdoor unit go on a Burntisland house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Burntisland home.
Will new radiators be much bigger than my old ones?
Sometimes, but not always. Swapping a single-panel radiator for a double or triple-panel model of the same height and width can raise output substantially, adding only depth from the wall. Where that is not enough, a longer or taller radiator, or a second radiator in the room, may be needed. We agree sizes and positions with you before anything is ordered.
Do I need new radiators for a heat pump?
Not necessarily: many homes keep most of their radiators and replace only a few. The heat loss survey checks each room against its existing radiator at the planned flow temperature. Rooms with large windows, high ceilings or extensions are the usual candidates for an upgrade, while bedrooms often need no change. Your radiator schedule lists every decision.