- Area
- Kent
- Postcode district
- CT6
- Nation
- England
- Guide price
- From £260 inc VAT
- Survey
- Free for installation enquiries
Before you book: heat pump radiator upgrades in Herne Bay
In Herne Bay, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Radiator fitting in Herne Bay is scheduled with your heat pump installation so the system is drained only once. For period homes in Herne Bay and across Kent, column radiators can keep the character of a room while giving enough heat at low temperatures.
We size each radiator to your room-by-room heat loss so a heat pump can heat your home at a low, efficient flow temperature.
- Extensions and loft conversions with large areas of glazing
- Rooms that already feel slow to heat, such as bay-windowed living rooms
- Rooms with little wall space, where a fan-assisted radiator fits better
What's included
- Making good around brackets and pipe routes, with any decorating agreed in your quote
- Room-by-room heat loss figures for every heated room
- Balancing every radiator so each room heats evenly
- Pipework checks and any agreed pipe upgrades
- A radiator schedule showing which radiators stay, which change and their outputs
We plan radiator upgrades in Herne Bay so floorboards are lifted only where pipework genuinely needs changing.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Herne Bay quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for heat pump radiator upgrades in Herne Bay
These are guide prices for Kent, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Work | Guide price |
|---|---|
| Replacement radiator, sized for a heat pump (each, fitted) | £260–£460 |
| Upgrade of about 10 radiators | £2,050–£5,150 |
| Pipework upgrade (e.g. microbore to larger bore) | £1,550–£3,600 |
Installed, inc VAT. The survey lists which radiators need changing.
Winter daylight and heating in Herne Bay
Herne Bay sees roughly 7 hours 51 minutes of daylight in late December against 16 hours 37 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
From survey to switch-on in Herne Bay
- Start online with a guide price or call us.
- A home survey in Herne Bay gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat pump radiator upgrades in Herne Bay: questions
Do you cover Whitstable as well as Herne Bay?
Yes. We arrange surveys and installation in Whitstable, which is about 5 miles west of Herne Bay, and across Kent.
What size heat pump does a Herne Bay home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Herne Bay home.
Do I need new radiators for a heat pump in Herne Bay?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Herne Bay home gives a room-by-room list.
Can radiators be changed without draining the whole system?
Radiator changes normally mean draining the heating system, which is why they are usually done as part of the heat pump installation. The system is then refilled, flushed, treated with inhibitor and balanced. Doing the radiators at the same time avoids draining twice and means the new radiators are commissioned with the heat pump.
Do I need new radiators for a heat pump?
Not necessarily: many homes keep most of their radiators and replace only a few. The heat loss survey checks each room against its existing radiator at the planned flow temperature. Rooms with large windows, high ceilings or extensions are the usual candidates for an upgrade, while bedrooms often need no change. Your radiator schedule lists every decision.