Air source heat pumps, surveyed, designed and installed· Free home survey for installation enquiries
0800 088 6341
Heat pump radiators
Lancashire · PR1

Heat pump radiators in Preston

Looking into heat pump radiator upgrades for a home in Preston? We look at the whole heating system — emitters, pipework, cylinder space and controls — so the heat pump can run efficiently.

Area
Lancashire
Postcode district
PR1
Nation
England
Guide price
From £240 inc VAT
Survey
Free for installation enquiries

Heat pump radiators for Preston homes

Every property in Preston is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.

For period homes in Preston and across Lancashire, column radiators can keep the character of a room while giving enough heat at low temperatures. Extensions and kitchen-diners around Preston with large glazed areas get their own radiator calculation.

We size each radiator to your room-by-room heat loss so a heat pump can heat your home at a low, efficient flow temperature.

  • Rooms that already feel slow to heat, such as bay-windowed living rooms
  • Homeowners who want the lowest practical flow temperature for efficiency
  • Rooms with little wall space, where a fan-assisted radiator fits better

What's included

  • Supply and fitting of new radiators, valves and brackets
  • Room-by-room heat loss figures for every heated room
  • Balancing every radiator so each room heats evenly
  • Pipework checks and any agreed pipe upgrades
  • Draining, refilling, cleaning and inhibitor treatment of the heating system

In Preston, bay-windowed front rooms are often the rooms that need a larger radiator when moving to a heat pump.

Grants and rules for heat pumps in England

England

In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Preston quote.

Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.

What to budget for heat pump radiator upgrades in Preston

Guide prices for Preston and the rest of Lancashire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.

What to budget for heat pump radiator upgrades in Preston
WorkGuide price
Replacement radiator, sized for a heat pump (each, fitted)£240–£440
Upgrade of about 10 radiators£1,950–£4,900
Pipework upgrade (e.g. microbore to larger bore)£1,450–£3,450

Installed, inc VAT. The survey lists which radiators need changing.

Designing for Preston's winters

7 h 25 minDaylight on the shortest day
17 h 06 minDaylight on the longest day
13°Noon sun height in December
53.76°NLatitude of Preston

Preston sees roughly 7 hours 25 minutes of daylight in December and 17 hours 06 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.

The steps for heat pump radiator upgrades in Preston

  1. Send your postcode and a few details, or use the guide price tool.
  2. A surveyor visits your Preston home, measures every room and checks where the outdoor unit can go.
  3. You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
  4. Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
  5. The system is commissioned, set up with weather compensation and handed over with the paperwork.

Heat pump radiator upgrades in Preston: questions

What size heat pump does a Preston home need?

It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Preston home.

Where would the outdoor unit go on a Preston house?

Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Preston home.

Do you cover Leyland as well as Preston?

Yes. We arrange surveys and installation in Leyland, which is about 5 miles south of Preston, and across Lancashire.

Are fan-assisted radiators noisy?

Fan-assisted radiators make a low, steady fan sound when running at higher output, and many have quieter settings for bedrooms at night. They are useful where wall space is short, such as a kitchen with few clear walls. They need a small electrical supply, which we plan into the installation if you choose them.

Can I keep my radiators and just run the heat pump hotter?

You can, but it usually costs more to run. Every extra degree of flow temperature reduces a heat pump's efficiency, so a system designed at 55°C uses noticeably more electricity than one at 45°C for the same heat. A few well-chosen radiator upgrades often let the whole house run cooler, which is the better long-term trade.

Ready to price your heat pump?

Use the guide price tool, or book a free home survey and fixed written quote.

CallGet a quote