Pairing a heat pump with solar PV means using electricity generated by panels on your roof to run the heat pump, so less is bought from the grid. Solar PV (photovoltaic) panels turn daylight into electricity, and a heat pump is one of the largest electrical loads in an electrically heated home, so the two are often planned together.
Homes in Berkshire with existing panels can often have the heat pump set to heat water from their daytime output. Roof orientation and shading vary street by street in Berkshire, so solar is assessed on each roof individually. We plan heat pump and solar electrics together for Berkshire homes so the consumer unit is upgraded only once.
Who it suits
- Homes with existing solar PV that currently export much of their output
- Households considering a battery to store daytime or cheaper overnight electricity
- Homes with a roof facing anywhere from east through south to west, with little shading
- Households at home during the day or with flexible hot water timing
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Prices
Solar panels and batteries are quoted separately after a roof survey. For heat pump system prices see the guide prices.
Towns we cover in Berkshire
We cover 10 towns in Berkshire for heat pumps with solar panels and batteries. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Reading | RG1 | Lower Earley | 7 h 50 min |
| Slough | SL1 | Maidenhead | 7 h 49 min |
| Bracknell | RG12 | Crowthorne | 7 h 50 min |
| Maidenhead | SL6 | Slough | 7 h 49 min |
| Wokingham | RG40 | Crowthorne | 7 h 50 min |
| Newbury | RG14 | Thatcham | 7 h 51 min |
| Lower Earley | RG6 | Reading | 7 h 50 min |
| Crowthorne | RG45 | Sandhurst | 7 h 51 min |
| Thatcham | RG19 | Newbury | 7 h 51 min |
| Sandhurst | GU47 | Crowthorne | 7 h 51 min |
Heat pumps with solar panels and batteries questions
Can solar panels run my heat pump in winter?
Only partly. In midwinter, solar panels typically generate a small fraction of their summer output, and the shortest days coincide with the highest heating demand. Panels may help on bright winter afternoons, but most winter heating will run on grid electricity or a battery charged from a cheaper overnight tariff. Solar contributes most to hot water from spring to autumn.
Do I need a battery to benefit from solar with a heat pump?
No. Without a battery you can still use solar generation directly by timing hot water heating for the middle of the day. A battery adds flexibility by storing surplus for the evening, or by charging from a cheaper overnight tariff in winter. Whether it suits you depends on how much you would otherwise export and on your tariff.
Is a solar diverter useful with a heat pump?
It can be, but less so than with a gas boiler. A diverter heats water through the immersion heater, which turns one unit of electricity into one unit of heat, while a heat pump typically makes around three. Scheduling the heat pump to heat water at midday usually uses solar more efficiently, with a diverter adding top-ups on very sunny days.
Should I fit solar panels before or after a heat pump?
Either order works, but planning both together helps. Knowing the heat pump's electricity use helps size the panels and any battery, and the electrical work for both can be coordinated, including the consumer unit and any notification to the network operator. If you already have panels, the heat pump controls can be set to use their output for hot water.