A heat pump for a let property is a full air source heating and hot water system designed around how tenants use the home, with installation, handover and servicing planned to suit both landlord and tenant. Landlords follow the same survey and design process as owner-occupiers, and in England and Wales they can use the Boiler Upgrade Scheme for their let homes.
For tenanted homes in Gloucestershire, installation dates and access are agreed in writing before work starts. Flats in Gloucestershire and across Gloucestershire need freeholder consent checked early, before the outdoor unit position is fixed. Landlords with let homes in Gloucestershire can have each property surveyed and quoted separately or as a group.
Who it suits
- Landlords who want to remove gas appliances from a property
- Landlords in England and Wales replacing gas, oil or electric heating in let homes
- HMOs with high hot water demand that need careful cylinder sizing
- Properties between tenancies, when access and disruption are easier to manage
Grants and rules for heat pumps in England
Homes in Gloucestershire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pumps for landlords prices in Gloucestershire
These are guide prices for Gloucestershire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,600–£12,650 | £2,100–£5,150 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,600–£13,650 | £3,100–£6,150 |
| 3 bedroom semi or small detached | 6–9 kW | £12,100–£15,650 | £4,600–£8,150 |
| 4 bedroom detached | 8–12 kW | £14,150–£18,200 | £6,650–£10,700 |
| 5+ bedroom or larger older house | 11–16 kW | £16,650–£22,750 | £9,150–£15,250 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in Gloucestershire
We cover 12 towns in Gloucestershire for landlords and let properties. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Gloucester | GL1 | Cheltenham | 7 h 46 min |
| Cheltenham | GL50 | Tewkesbury | 7 h 45 min |
| Stroud | GL6 | Dursley | 7 h 47 min |
| Kingswood | BS15 | Mangotsfield | 7 h 50 min |
| Mangotsfield | BS16 | Kingswood | 7 h 50 min |
| Yate | BS37 | Mangotsfield | 7 h 49 min |
| Tewkesbury | GL20 | Cheltenham | 7 h 44 min |
| Cirencester | GL7 | Stroud | 7 h 47 min |
| Dursley | GL11 | Lydney | 7 h 48 min |
| Lydney | GL15 | Dursley | 7 h 47 min |
| Stow-on-the-Wold | GL56 | Chipping Norton | 7 h 45 min |
| Thornbury | BS35 | Yate | 7 h 48 min |
Landlords and let properties questions
Can I install a heat pump while tenants are living in the property?
Yes. Most installations typically take 2–4 days on site, with heating and hot water off for part of that time. We agree dates and access with you, provide written details to pass to tenants, and plan the changeover to keep downtime short. Preparing the outdoor unit and cylinder first shortens the period without heating.
Do tenants need training to use a heat pump?
Not training, but a clear explanation helps. Heat pumps are designed to run steadily, with radiators feeling warm rather than hot, so tenants used to boilers may be tempted to switch them off. We provide a handover sheet written for tenants covering the controls, hot water times, what to do if an error appears and why the unit should stay on.
Will a heat pump improve my property's EPC rating?
It can, but the effect varies. EPC ratings depend on insulation, glazing, the heating system and how the assessment is modelled, so a heat pump in a poorly insulated home may change the rating less than expected. Check the current letting standards for your nation, and ask an EPC assessor to model the change if the rating matters for your plans.
Can a heat pump go on a block of flats or an HMO?
Often, yes, but it needs more planning. In flats, the outdoor unit position and pipe routes usually need freeholder or management company consent, and some positions need planning permission depending on the nation, which we check at survey. In HMOs, hot water demand is higher, so cylinder sizing is critical. Larger buildings may suit a commercial design instead.