A heat pump for a let property is a full air source heating and hot water system designed around how tenants use the home, with installation, handover and servicing planned to suit both landlord and tenant. Landlords follow the same survey and design process as owner-occupiers, and in England and Wales they can use the Boiler Upgrade Scheme for their let homes.
Landlords with let homes in Warwickshire can have each property surveyed and quoted separately or as a group. Terraced rental homes in Warwickshire often have small yards, so outdoor unit siting is checked carefully at survey. Shared houses in Warwickshire usually need larger hot water storage to cope with busy mornings.
Who it suits
- Landlords who want to remove gas appliances from a property
- Portfolio landlords planning upgrades across several properties
- Landlords in England and Wales replacing gas, oil or electric heating in let homes
- HMOs with high hot water demand that need careful cylinder sizing
Grants and rules for heat pumps in England
Homes in Warwickshire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pumps for landlords prices in Warwickshire
The ranges below are typical installed prices for homes in Warwickshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Warwickshire can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in Warwickshire
We cover 10 towns in Warwickshire for landlords and let properties. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Nuneaton | CV11 | Bedworth | 7 h 39 min |
| Rugby | CV21 | Lutterworth | 7 h 40 min |
| Royal Leamington Spa | CV31 | Warwick | 7 h 41 min |
| Warwick | CV34 | Royal Leamington Spa | 7 h 41 min |
| Bedworth | CV12 | Nuneaton | 7 h 39 min |
| Stratford-upon-Avon | CV37 | Alcester | 7 h 42 min |
| Kenilworth | CV8 | Warwick | 7 h 41 min |
| Alcester | B49 | Stratford-upon-Avon | 7 h 42 min |
| Atherstone | CV9 | Nuneaton | 7 h 38 min |
| Shipston-on-Stour | CV36 | Stratford-upon-Avon | 7 h 44 min |
Landlords and let properties questions
Can a heat pump go on a block of flats or an HMO?
Often, yes, but it needs more planning. In flats, the outdoor unit position and pipe routes usually need freeholder or management company consent, and some positions need planning permission depending on the nation, which we check at survey. In HMOs, hot water demand is higher, so cylinder sizing is critical. Larger buildings may suit a commercial design instead.
Do tenants need training to use a heat pump?
Not training, but a clear explanation helps. Heat pumps are designed to run steadily, with radiators feeling warm rather than hot, so tenants used to boilers may be tempted to switch them off. We provide a handover sheet written for tenants covering the controls, hot water times, what to do if an error appears and why the unit should stay on.
How much does a heat pump cost for a rental property?
A full air-to-water system for a typical 3 bedroom home has an installed guide price of £12,000–£15,500, including VAT, or £4,500–£8,000 after the standard Boiler Upgrade Scheme grant in England and Wales. Flats and small terraces typically sit at £9,500–£12,500. Your written quote fixes the price after the survey.
Can I install a heat pump while tenants are living in the property?
Yes. Most installations typically take 2–4 days on site, with heating and hot water off for part of that time. We agree dates and access with you, provide written details to pass to tenants, and plan the changeover to keep downtime short. Preparing the outdoor unit and cylinder first shortens the period without heating.