- Area
- County Durham
- Postcode district
- TS23
- Nation
- England
- Guide price
- From £9,200 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing an oil or LPG boiler with a heat pump in Billingham
Homes around Billingham range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Owners across County Durham can have oil tank removal arranged alongside a heat pump installation in Billingham. If your home near Billingham is off the mains gas grid, a heat pump removes the need for oil or LPG deliveries.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Detached houses and bungalows with garden space for the unit
- Owners tired of fuel deliveries and tank maintenance
- Eligible homes in England and Wales within the higher grant window
What's included
- Oil tank draining and removal or making safe, as set out in your quote
- Network operator notification and electrical connection
- MCS certificate and grant application in England and Wales where eligible
- Outdoor unit, heat pump cylinder, controls and radiator changes
- Help arranging LPG tank collection with your supplier
For homes outside Billingham reached by a long drive or narrow lane, delivery of the unit and cylinder is planned in advance.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Billingham quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for replacing an oil or LPG boiler with a heat pump in Billingham
These are guide prices for County Durham, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £200–£3,150 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £1,200–£4,100 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £2,650–£6,050 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £4,600–£8,450 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £7,000–£12,850 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
How long is the heating season in Billingham?
On the shortest day Billingham gets only about 7 hours 15 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
What happens after you enquire in Billingham?
- Start online with a guide price or call us.
- A home survey in Billingham gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing an oil or LPG boiler with a heat pump in Billingham: questions
How long does installation take in Billingham?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Billingham home states the expected time.
Where would the outdoor unit go on a Billingham house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Billingham home.
Do I need new radiators for a heat pump in Billingham?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Billingham home gives a room-by-room list.
Do I have to remove my oil tank?
Not always, but it should be emptied and made safe. A tank in good condition can be drained, cleaned and left in place, though most owners prefer to have it taken away to free up space. Old or damaged tanks are usually removed. Your quote says which option is included, and any remaining oil and sludge is disposed of properly.
Can a heat pump cope with an exposed rural spot?
Yes. Air source heat pumps are designed to keep working well below freezing, and they periodically defrost, giving off a little vapour, which is normal. In exposed locations the installer chooses a sheltered position where possible, raises the unit to clear snow and let defrost water drain, and sizes the system for the local winter design temperature used in the heat loss calculation.