- Area
- Derbyshire
- Postcode district
- SK17
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing an oil or LPG boiler with a heat pump in Buxton
Homes around Buxton range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Cottages and farmhouses in and around Buxton often have solid walls, so the survey looks closely at construction and draughts. If your home near Buxton is off the mains gas grid, a heat pump removes the need for oil or LPG deliveries.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Older oil boilers nearing the end of their life
- Eligible homes in England and Wales within the higher grant window
- Rural and village homes off the mains gas grid
What's included
- Help arranging LPG tank collection with your supplier
- Free survey with a detailed heat loss calculation for older construction
- Oil tank draining and removal or making safe, as set out in your quote
- Removal of the oil or LPG boiler and flue
- Outdoor unit, heat pump cylinder, controls and radiator changes
For homes outside Buxton reached by a long drive or narrow lane, delivery of the unit and cylinder is planned in advance.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Buxton quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for replacing an oil or LPG boiler with a heat pump in Buxton
Guide prices for Buxton and the rest of Derbyshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £500–£3,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £1,500–£4,500 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £3,000–£6,500 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £5,000–£9,000 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £7,500–£13,500 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
Designing for Buxton's winters
On the shortest day Buxton gets about 7 hours 31 minutes of daylight, with the noon sun around 13° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
The steps for replacing an oil or LPG boiler with a heat pump in Buxton
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Buxton; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing an oil or LPG boiler with a heat pump in Buxton: questions
Where would the outdoor unit go on a Buxton house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Buxton home.
What size heat pump does a Buxton home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Buxton home.
Can you service a heat pump in Buxton that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Buxton, whoever fitted them. Tell us the make and model when you book.
Is a heat pump cheaper to run than oil?
It depends on oil prices, your home's insulation, the flow temperature and your electricity tariff, so there is no single answer. At the October to December 2026 price cap, a heat pump with a seasonal efficiency of 3.0 delivers heat for about 8.8p per kWh, and at 3.5 about 7.5p. Compare that with your oil cost per kWh of heat, allowing for your boiler's efficiency; the survey estimate gives a figure for your home.
Can a heat pump cope with an exposed rural spot?
Yes. Air source heat pumps are designed to keep working well below freezing, and they periodically defrost, giving off a little vapour, which is normal. In exposed locations the installer chooses a sheltered position where possible, raises the unit to clear snow and let defrost water drain, and sizes the system for the local winter design temperature used in the heat loss calculation.