- Area
- Essex
- Postcode district
- CM12
- Nation
- England
- Guide price
- From £9,800 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing an oil or LPG boiler with a heat pump in Billericay
In Billericay, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Owners across Essex can have oil tank removal arranged alongside a heat pump installation in Billericay. Cottages and farmhouses in and around Billericay often have solid walls, so the survey looks closely at construction and draughts.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Detached houses and bungalows with garden space for the unit
- Older oil boilers nearing the end of their life
- Eligible homes in England and Wales within the higher grant window
What's included
- Help arranging LPG tank collection with your supplier
- Network operator notification and electrical connection
- Outdoor unit, heat pump cylinder, controls and radiator changes
- Removal of the oil or LPG boiler and flue
- Free survey with a detailed heat loss calculation for older construction
If your home near Billericay is off the mains gas grid, a heat pump removes the need for oil or LPG deliveries.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Billericay quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for replacing an oil or LPG boiler with a heat pump in Billericay
The ranges below are typical installed prices for homes in Essex, including VAT. A survey sets the exact figure, because two similar-looking houses in Billericay can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £800–£3,900 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £1,800–£4,900 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £3,350–£6,950 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £5,400–£9,550 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £8,000–£14,200 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
Short winter days in Billericay and what they mean
Billericay has about 7 hours 48 minutes of daylight at midwinter and 16 hours 40 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
From survey to switch-on in Billericay
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Billericay; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing an oil or LPG boiler with a heat pump in Billericay: questions
Do I need new radiators for a heat pump in Billericay?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Billericay home gives a room-by-room list.
How soon can you survey a home in Billericay?
Survey dates depend on how busy installers are in Essex. We offer the next available dates when you enquire and confirm them in writing.
What size heat pump does a Billericay home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Billericay home.
Can a heat pump cope with an exposed rural spot?
Yes. Air source heat pumps are designed to keep working well below freezing, and they periodically defrost, giving off a little vapour, which is normal. In exposed locations the installer chooses a sheltered position where possible, raises the unit to clear snow and let defrost water drain, and sizes the system for the local winter design temperature used in the heat loss calculation.
Do I have to remove my oil tank?
Not always, but it should be emptied and made safe. A tank in good condition can be drained, cleaned and left in place, though most owners prefer to have it taken away to free up space. Old or damaged tanks are usually removed. Your quote says which option is included, and any remaining oil and sludge is disposed of properly.