- Area
- Gloucestershire
- Postcode district
- BS37
- Nation
- England
- Guide price
- From £9,600 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing an oil or LPG boiler with a heat pump in Yate
In Yate, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Rural properties near Yate usually have garden space for the outdoor unit, sited away from windows and sheltered where possible. Owners across Gloucestershire can have oil tank removal arranged alongside a heat pump installation in Yate.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Rural and village homes off the mains gas grid
- Detached houses and bungalows with garden space for the unit
- Eligible homes in England and Wales within the higher grant window
What's included
- Oil tank draining and removal or making safe, as set out in your quote
- MCS certificate and grant application in England and Wales where eligible
- Outdoor unit, heat pump cylinder, controls and radiator changes
- Free survey with a detailed heat loss calculation for older construction
- Help arranging LPG tank collection with your supplier
Bungalows and detached houses near Yate running on LPG can move to a heat pump, with the tank collected by the supplier.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Yate quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Oil and LPG boiler replacement costs around Yate
Here are typical prices for replacing an oil or LPG boiler with a heat pump in Gloucestershire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,600–£12,650 | £600–£3,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,600–£13,650 | £1,600–£4,650 |
| 3 bedroom semi or small detached | 6–9 kW | £12,100–£15,650 | £3,100–£6,650 |
| 4 bedroom detached | 8–12 kW | £14,150–£18,200 | £5,150–£9,200 |
| 5+ bedroom or larger older house | 11–16 kW | £16,650–£22,750 | £7,650–£13,750 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
How long is the heating season in Yate?
On the shortest day Yate gets about 7 hours 49 minutes of daylight, and the winter sun reaches only around 15° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
From survey to switch-on in Yate
- Start online with a guide price or call us.
- A home survey in Yate gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing an oil or LPG boiler with a heat pump in Yate: questions
How long does installation take in Yate?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Yate home states the expected time.
Can you service a heat pump in Yate that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Yate, whoever fitted them. Tell us the make and model when you book.
How long does a heat pump survey take in Yate?
A home survey in Yate usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I have to remove my oil tank?
Not always, but it should be emptied and made safe. A tank in good condition can be drained, cleaned and left in place, though most owners prefer to have it taken away to free up space. Old or damaged tanks are usually removed. Your quote says which option is included, and any remaining oil and sludge is disposed of properly.
Can a heat pump cope with an exposed rural spot?
Yes. Air source heat pumps are designed to keep working well below freezing, and they periodically defrost, giving off a little vapour, which is normal. In exposed locations the installer chooses a sheltered position where possible, raises the unit to clear snow and let defrost water drain, and sizes the system for the local winter design temperature used in the heat loss calculation.