- Area
- Northamptonshire
- Postcode district
- NN17
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Oil and LPG boiler replacement for Corby homes
In Corby, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Bungalows and detached houses near Corby running on LPG can move to a heat pump, with the tank collected by the supplier. Owners across Northamptonshire can have oil tank removal arranged alongside a heat pump installation in Corby.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Eligible homes in England and Wales within the higher grant window
- Older oil boilers nearing the end of their life
- Owners tired of fuel deliveries and tank maintenance
What's included
- Help arranging LPG tank collection with your supplier
- Oil tank draining and removal or making safe, as set out in your quote
- Free survey with a detailed heat loss calculation for older construction
- Network operator notification and electrical connection
- Removal of the oil or LPG boiler and flue
If your home near Corby is off the mains gas grid, a heat pump removes the need for oil or LPG deliveries.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Corby quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for replacing an oil or LPG boiler with a heat pump in Corby
Here are typical prices for replacing an oil or LPG boiler with a heat pump in Northamptonshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £500–£3,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £1,500–£4,500 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £3,000–£6,500 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £5,000–£9,000 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £7,500–£13,500 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
Winter daylight and heating in Corby
Corby has about 7 hours 39 minutes of daylight at midwinter and 16 hours 50 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
The steps for replacing an oil or LPG boiler with a heat pump in Corby
- Start online with a guide price or call us.
- A home survey in Corby gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing an oil or LPG boiler with a heat pump in Corby: questions
What size heat pump does a Corby home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Corby home.
How long does installation take in Corby?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Corby home states the expected time.
How soon can you survey a home in Corby?
Survey dates depend on how busy installers are in Northamptonshire. We offer the next available dates when you enquire and confirm them in writing.
Is a heat pump cheaper to run than oil?
It depends on oil prices, your home's insulation, the flow temperature and your electricity tariff, so there is no single answer. At the October to December 2026 price cap, a heat pump with a seasonal efficiency of 3.0 delivers heat for about 8.8p per kWh, and at 3.5 about 7.5p. Compare that with your oil cost per kWh of heat, allowing for your boiler's efficiency; the survey estimate gives a figure for your home.
What happens with a leased LPG tank?
Leased LPG tanks belong to the supplier, so the supplier arranges collection. Check your contract for notice periods and any charges before you fix a date. We time the switchover so you are not left without heating, and once the heat pump is commissioned the supplier can empty and remove the tank. Bottled LPG cylinders are simply returned.