- Area
- West Sussex
- Postcode district
- RH15
- Nation
- England
- Guide price
- From £9,900 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing an oil or LPG boiler with a heat pump in Burgess Hill
Most homes can run on a heat pump if the system is designed properly, and Burgess Hill is no different. The key is matching the heat pump and radiators to the home's heat loss.
Rural properties near Burgess Hill usually have garden space for the outdoor unit, sited away from windows and sheltered where possible. Cottages and farmhouses in and around Burgess Hill often have solid walls, so the survey looks closely at construction and draughts.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Eligible homes in England and Wales within the higher grant window
- Older oil boilers nearing the end of their life
- Owners tired of fuel deliveries and tank maintenance
What's included
- Outdoor unit, heat pump cylinder, controls and radiator changes
- Oil tank draining and removal or making safe, as set out in your quote
- Free survey with a detailed heat loss calculation for older construction
- Network operator notification and electrical connection
- Help arranging LPG tank collection with your supplier
Owners across West Sussex can have oil tank removal arranged alongside a heat pump installation in Burgess Hill.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Burgess Hill quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for replacing an oil or LPG boiler with a heat pump in Burgess Hill
These are guide prices for West Sussex, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,900–£13,000 | £900–£4,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,900–£14,050 | £1,900–£5,050 |
| 3 bedroom semi or small detached | 6–9 kW | £12,500–£16,100 | £3,500–£7,100 |
| 4 bedroom detached | 8–12 kW | £14,550–£18,700 | £5,550–£9,700 |
| 5+ bedroom or larger older house | 11–16 kW | £17,150–£23,400 | £8,150–£14,400 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
Designing for Burgess Hill's winters
Burgess Hill sees roughly 7 hours 55 minutes of daylight in late December against 16 hours 32 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
How installation works in Burgess Hill
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Burgess Hill home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing an oil or LPG boiler with a heat pump in Burgess Hill: questions
What size heat pump does a Burgess Hill home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Burgess Hill home.
How long does installation take in Burgess Hill?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Burgess Hill home states the expected time.
Can you service a heat pump in Burgess Hill that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Burgess Hill, whoever fitted them. Tell us the make and model when you book.
What happens with a leased LPG tank?
Leased LPG tanks belong to the supplier, so the supplier arranges collection. Check your contract for notice periods and any charges before you fix a date. We time the switchover so you are not left without heating, and once the heat pump is commissioned the supplier can empty and remove the tank. Bottled LPG cylinders are simply returned.
Is a heat pump cheaper to run than oil?
It depends on oil prices, your home's insulation, the flow temperature and your electricity tariff, so there is no single answer. At the October to December 2026 price cap, a heat pump with a seasonal efficiency of 3.0 delivers heat for about 8.8p per kWh, and at 3.5 about 7.5p. Compare that with your oil cost per kWh of heat, allowing for your boiler's efficiency; the survey estimate gives a figure for your home.