- Area
- Worcestershire
- Postcode district
- WR10
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing an oil or LPG boiler with a heat pump in Pershore
Homes around Pershore range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Bungalows and detached houses near Pershore running on LPG can move to a heat pump, with the tank collected by the supplier. Owners across Worcestershire can have oil tank removal arranged alongside a heat pump installation in Pershore.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Rural and village homes off the mains gas grid
- Eligible homes in England and Wales within the higher grant window
- Detached houses and bungalows with garden space for the unit
What's included
- Free survey with a detailed heat loss calculation for older construction
- Outdoor unit, heat pump cylinder, controls and radiator changes
- MCS certificate and grant application in England and Wales where eligible
- Oil tank draining and removal or making safe, as set out in your quote
- Network operator notification and electrical connection
Cottages and farmhouses in and around Pershore often have solid walls, so the survey looks closely at construction and draughts.
Grants and rules for heat pumps in England
Homes in Pershore can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for replacing an oil or LPG boiler with a heat pump in Pershore
Guide prices for Pershore and the rest of Worcestershire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £500–£3,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £1,500–£4,500 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £3,000–£6,500 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £5,000–£9,000 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £7,500–£13,500 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
How long is the heating season in Pershore?
Pershore has about 7 hours 43 minutes of daylight at midwinter and 16 hours 45 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
What happens after you enquire in Pershore?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Pershore home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing an oil or LPG boiler with a heat pump in Pershore: questions
How long does a heat pump survey take in Pershore?
A home survey in Pershore usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does a Pershore home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Pershore home.
Do you cover Evesham as well as Pershore?
Yes. We arrange surveys and installation in Evesham, which is about 6 miles east of Pershore, and across Worcestershire.
Do I have to remove my oil tank?
Not always, but it should be emptied and made safe. A tank in good condition can be drained, cleaned and left in place, though most owners prefer to have it taken away to free up space. Old or damaged tanks are usually removed. Your quote says which option is included, and any remaining oil and sludge is disposed of properly.
Will I need bigger radiators in an older cottage or farmhouse?
Often in some rooms, because thick solid walls and older windows lose more heat, and heat pumps work at lower water temperatures than oil boilers. The survey checks each room. Rooms with high ceilings or large windows are common candidates for a larger radiator. Where swapping radiators is impractical, a high-temperature unit can be considered, with lower efficiency as the trade-off.