- Area
- Aberdeenshire and Moray
- Postcode district
- AB42
- Nation
- Scotland
- Guide price
- From £9,800 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation for Peterhead homes
In Peterhead, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
In Peterhead, cylinder space is planned with you, often in an airing cupboard, utility room or garage. For older properties in Peterhead, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Households with room for a hot water cylinder
- Owners who want one contract covering design, fitting and paperwork
What's included
- Radiator and pipework changes where the design needs them
- Free home survey and room-by-room heat loss calculation
- Outdoor unit, hot water cylinder and weather compensation controls
- MCS registration and certificate, plus network operator notification
- System design, unit sizing and a written quote
Many homes in Peterhead have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Peterhead can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Peterhead property at survey.
What to budget for air source heat pump installation in Peterhead
Here are typical prices for air source heat pump installation in Aberdeenshire and Moray, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price |
|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.
How long is the heating season in Peterhead?
On the shortest day Peterhead gets only about 6 hours 35 minutes of daylight, with the sun around 9° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
The steps for air source heat pump installation in Peterhead
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Peterhead home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Peterhead: questions
Do you cover Ellon as well as Peterhead?
Yes. We arrange surveys and installation in Ellon, which is about 14 miles south-west of Peterhead, and across Aberdeenshire and Moray.
What size heat pump does a Peterhead home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Peterhead home.
How long does a heat pump survey take in Peterhead?
A home survey in Peterhead usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.