- Area
- Aberdeenshire and Moray
- Postcode district
- AB42
- Nation
- Scotland
- Guide price
- From £2,450 inc VAT
- Survey
- Free for installation enquiries
What to know about air-to-air heat pumps in Peterhead
In Peterhead, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Installers in Peterhead plan condensate drains and pipe covers so indoor and outdoor runs stay neat. Flats in Peterhead on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Flats and apartments with storage or panel heaters
- Rooms that get too hot in summer as well as cold in winter
- Extensions, conservatories and garden rooms
What's included
- Electrical supply and controls set up for each room
- Free survey covering rooms to heat, unit positions and hot water options
- Condensate drains and neat external pipe covers
- Outdoor unit and indoor units for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
A survey in Peterhead covers indoor unit positions, pipe routes and hot water for homes across Aberdeenshire and Moray.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Peterhead home, apply and receive the written offer before the installation date is fixed.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
Guide prices for air-to-air heat pumps in Peterhead
Here are typical prices for air-to-air heat pumps in Aberdeenshire and Moray, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,450–£5,150 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,100–£8,250 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Short winter days in Peterhead and what they mean
Peterhead has about 6 hours 35 minutes of daylight at midwinter against 18 hours 02 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
The steps for air-to-air heat pumps in Peterhead
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Peterhead home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air-to-air heat pumps in Peterhead: questions
How long does a heat pump survey take in Peterhead?
A home survey in Peterhead usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Can you service a heat pump in Peterhead that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Peterhead, whoever fitted them. Tell us the make and model when you book.
How long does installation take in Peterhead?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Peterhead home states the expected time.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.