- Area
- Dyfed
- Postcode district
- SA70
- Nation
- Wales
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation in Tenby: what to expect
Most homes can run on a heat pump if the system is designed properly, and Tenby is no different. The key is matching the heat pump and radiators to the home's heat loss.
Homeowners across Dyfed can arrange a survey in Tenby for a room-by-room design and a written quote before committing to anything. For older properties in Tenby, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Homes replacing a gas, oil, LPG or electric heating system
- Households with room for a hot water cylinder
What's included
- Free home survey and room-by-room heat loss calculation
- MCS registration and certificate, plus network operator notification
- Boiler Upgrade Scheme application in England and Wales where eligible
- System design, unit sizing and a written quote
- Outdoor unit, hot water cylinder and weather compensation controls
Installers working in Tenby plan the order of work so heating and hot water are off for as short a time as practical.
Grants and rules for heat pumps in Wales
Homes in Tenby can use the Boiler Upgrade Scheme, which applies in Wales as well as England: £7,500 towards an air source heat pump, or £9,000 when it replaces oil or LPG heating for installations from 21 July 2026 to 31 March 2027. The MCS-certified installer named in your quote applies and deducts the grant.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Wales has its own permitted development rules for air source heat pumps, so we check what applies to your property, including listed building and conservation-area constraints, at the survey.
Air source heat pump installation costs around Tenby
These are guide prices for Dyfed, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Tenby?
Tenby has about 7 hours 48 minutes of daylight at midwinter and 16 hours 40 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
How installation works in Tenby
- Start online with a guide price or call us.
- A home survey in Tenby gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Tenby: questions
How soon can you survey a home in Tenby?
Survey dates depend on how busy installers are in Dyfed. We offer the next available dates when you enquire and confirm them in writing.
What size heat pump does a Tenby home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Tenby home.
How long does installation take in Tenby?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Tenby home states the expected time.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.