- Area
- East Sussex
- Postcode district
- TN31
- Nation
- England
- Guide price
- From £9,800 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Rye
Homes around Rye range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
For older properties in Rye, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized. Installers working in Rye plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Households with room for a hot water cylinder
- Owners who want one contract covering design, fitting and paperwork
What's included
- Outdoor unit, hot water cylinder and weather compensation controls
- Boiler Upgrade Scheme application in England and Wales where eligible
- Removal of the old boiler or heaters
- Commissioning, handover and a walk-through of the controls
- Free home survey and room-by-room heat loss calculation
Homeowners across East Sussex can arrange a survey in Rye for a room-by-room design and a written quote before committing to anything.
Grants and rules for heat pumps in England
Homes in Rye can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air source heat pump installation in Rye
Guide prices for Rye and the rest of East Sussex are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £2,300–£5,400 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £3,300–£6,400 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £4,850–£8,450 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £6,900–£11,050 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £9,500–£15,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Rye
Rye sees roughly 7 hours 55 minutes of daylight in late December against 16 hours 32 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
The steps for air source heat pump installation in Rye
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Rye; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air source heat pump installation in Rye: questions
What size heat pump does a Rye home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Rye home.
How soon can you survey a home in Rye?
Survey dates depend on how busy installers are in East Sussex. We offer the next available dates when you enquire and confirm them in writing.
Do I need new radiators for a heat pump in Rye?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Rye home gives a room-by-room list.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.