- Area
- East Sussex
- Postcode district
- TN31
- Nation
- England
- Guide price
- From £260 inc VAT
- Survey
- Free for installation enquiries
Heat pump radiators in Rye: what to expect
The question for a Rye home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
In Rye, bay-windowed front rooms are often the rooms that need a larger radiator when moving to a heat pump. Radiator fitting in Rye is scheduled with your heat pump installation so the system is drained only once.
We size each radiator to your room-by-room heat loss so a heat pump can heat your home at a low, efficient flow temperature.
- Extensions and loft conversions with large areas of glazing
- Rooms that already feel slow to heat, such as bay-windowed living rooms
- Rooms with little wall space, where a fan-assisted radiator fits better
What's included
- Room-by-room heat loss figures for every heated room
- Supply and fitting of new radiators, valves and brackets
- A radiator schedule showing which radiators stay, which change and their outputs
- Balancing every radiator so each room heats evenly
- Making good around brackets and pipe routes, with any decorating agreed in your quote
For period homes in Rye and across East Sussex, column radiators can keep the character of a room while giving enough heat at low temperatures.
Grants and rules for heat pumps in England
Homes in Rye can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat pump radiators costs around Rye
Guide prices for Rye and the rest of East Sussex are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Work | Guide price |
|---|---|
| Replacement radiator, sized for a heat pump (each, fitted) | £260–£460 |
| Upgrade of about 10 radiators | £2,050–£5,150 |
| Pipework upgrade (e.g. microbore to larger bore) | £1,550–£3,600 |
Installed, inc VAT. The survey lists which radiators need changing.
Short winter days in Rye and what they mean
On the shortest day Rye gets about 7 hours 55 minutes of daylight, and the winter sun reaches only around 16° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
How installation works in Rye
- Start online with a guide price or call us.
- A home survey in Rye gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat pump radiator upgrades in Rye: questions
How long does a heat pump survey take in Rye?
A home survey in Rye usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does a Rye home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Rye home.
Where would the outdoor unit go on a Rye house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Rye home.
Can radiators be changed without draining the whole system?
Radiator changes normally mean draining the heating system, which is why they are usually done as part of the heat pump installation. The system is then refilled, flushed, treated with inhibitor and balanced. Doing the radiators at the same time avoids draining twice and means the new radiators are commissioned with the heat pump.
How much does a heat pump radiator cost?
A replacement radiator sized for a heat pump has a guide price of £250–£450 each, installed and including VAT. Upgrading about ten radiators in a typical home has a guide price of £2,000–£5,000. The final price is fixed in your written quote after the survey, once the radiator schedule shows exactly which radiators change.