- Area
- Glasgow and Dunbartonshire
- Postcode district
- G62
- Nation
- Scotland
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Milngavie
Every property in Milngavie is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
In Milngavie, cylinder space is planned with you, often in an airing cupboard, utility room or garage. For older properties in Milngavie, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners who want one contract covering design, fitting and paperwork
- Houses with reasonable insulation, or a plan to improve it
- Households with room for a hot water cylinder
What's included
- Commissioning, handover and a walk-through of the controls
- MCS registration and certificate, plus network operator notification
- Free home survey and room-by-room heat loss calculation
- Removal of the old boiler or heaters
- System design, unit sizing and a written quote
Homeowners across Glasgow and Dunbartonshire can arrange a survey in Milngavie for a room-by-room design and a written quote before committing to anything.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Milngavie can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Milngavie property at survey.
Guide prices for air source heat pump installation in Milngavie
The ranges below are typical installed prices for homes in Glasgow and Dunbartonshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Milngavie can need quite different radiators and pipework.
| Home | Typical size | Installed guide price |
|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.
Short winter days in Milngavie and what they mean
Milngavie has about 6 hours 58 minutes of daylight at midwinter against 17 hours 36 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
What happens after you enquire in Milngavie?
- Start online with a guide price or call us.
- A home survey in Milngavie gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Milngavie: questions
Can you service a heat pump in Milngavie that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Milngavie, whoever fitted them. Tell us the make and model when you book.
Where would the outdoor unit go on a Milngavie house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Milngavie home.
How long does installation take in Milngavie?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Milngavie home states the expected time.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.