- Area
- Glasgow and Dunbartonshire
- Postcode district
- G81
- Nation
- Scotland
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Clydebank
A heat pump suits most Clydebank homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
In Clydebank, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Terraced streets in Clydebank often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Homes replacing a gas, oil, LPG or electric heating system
- Households with room for a hot water cylinder
What's included
- Radiator and pipework changes where the design needs them
- Removal of the old boiler or heaters
- Outdoor unit, hot water cylinder and weather compensation controls
- System design, unit sizing and a written quote
- MCS registration and certificate, plus network operator notification
Installers working in Clydebank plan the order of work so heating and hot water are off for as short a time as practical.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Clydebank can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Clydebank property at survey.
Air source heat pump installation costs around Clydebank
Here are typical prices for air source heat pump installation in Glasgow and Dunbartonshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price |
|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.
Winter daylight and heating in Clydebank
Clydebank has about 6 hours 58 minutes of daylight at midwinter against 17 hours 36 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
How installation works in Clydebank
- Start online with a guide price or call us.
- A home survey in Clydebank gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Clydebank: questions
Do I need new radiators for a heat pump in Clydebank?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Clydebank home gives a room-by-room list.
How long does a heat pump survey take in Clydebank?
A home survey in Clydebank usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Clydebank house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Clydebank home.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.