- Area
- Kent
- Postcode district
- ME10
- Nation
- England
- Guide price
- From £9,800 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Sittingbourne
A heat pump suits most Sittingbourne homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
In Sittingbourne, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Many homes in Sittingbourne have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Owners who want one contract covering design, fitting and paperwork
- Homes replacing a gas, oil, LPG or electric heating system
What's included
- System design, unit sizing and a written quote
- Removal of the old boiler or heaters
- Boiler Upgrade Scheme application in England and Wales where eligible
- Radiator and pipework changes where the design needs them
- MCS registration and certificate, plus network operator notification
For older properties in Sittingbourne, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Sittingbourne quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air source heat pump installation in Sittingbourne
Here are typical prices for air source heat pump installation in Kent, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £2,300–£5,400 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £3,300–£6,400 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £4,850–£8,450 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £6,900–£11,050 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £9,500–£15,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Sittingbourne?
Sittingbourne sees roughly 7 hours 51 minutes of daylight in late December against 16 hours 37 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
From survey to switch-on in Sittingbourne
- Start online with a guide price or call us.
- A home survey in Sittingbourne gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Sittingbourne: questions
Do you cover Faversham as well as Sittingbourne?
Yes. We arrange surveys and installation in Faversham, which is about 7 miles east of Sittingbourne, and across Kent.
How long does a heat pump survey take in Sittingbourne?
A home survey in Sittingbourne usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does a Sittingbourne home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Sittingbourne home.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.