- Area
- Renfrewshire and Inverclyde
- Postcode district
- PA11
- Nation
- Scotland
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Before you book: air source heat pump installation in Bridge of Weir
In Bridge of Weir, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
In Bridge of Weir, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Installers working in Bridge of Weir plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Homes replacing a gas, oil, LPG or electric heating system
- Households with room for a hot water cylinder
What's included
- Radiator and pipework changes where the design needs them
- System design, unit sizing and a written quote
- Outdoor unit, hot water cylinder and weather compensation controls
- MCS registration and certificate, plus network operator notification
- Free home survey and room-by-room heat loss calculation
Terraced streets in Bridge of Weir often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Bridge of Weir home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Bridge of Weir property at survey.
What to budget for air source heat pump installation in Bridge of Weir
These are guide prices for Renfrewshire and Inverclyde, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price |
|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.
How long is the heating season in Bridge of Weir?
Bridge of Weir has about 6 hours 59 minutes of daylight at midwinter against 17 hours 35 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
The steps for air source heat pump installation in Bridge of Weir
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Bridge of Weir; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air source heat pump installation in Bridge of Weir: questions
Do I need new radiators for a heat pump in Bridge of Weir?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Bridge of Weir home gives a room-by-room list.
How long does a heat pump survey take in Bridge of Weir?
A home survey in Bridge of Weir usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Bridge of Weir house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Bridge of Weir home.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.