- Area
- West Midlands
- Postcode district
- WV1
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation for Wolverhampton homes
In Wolverhampton, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
For older properties in Wolverhampton, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized. Installers working in Wolverhampton plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Houses with reasonable insulation, or a plan to improve it
- Owners who want one contract covering design, fitting and paperwork
What's included
- System design, unit sizing and a written quote
- Free home survey and room-by-room heat loss calculation
- Commissioning, handover and a walk-through of the controls
- Outdoor unit, hot water cylinder and weather compensation controls
- Radiator and pipework changes where the design needs them
Terraced streets in Wolverhampton often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Wolverhampton quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air source heat pump installation in Wolverhampton
Guide prices for Wolverhampton and the rest of the West Midlands are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Wolverhampton and what they mean
On the shortest day Wolverhampton gets about 7 hours 38 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
The steps for air source heat pump installation in Wolverhampton
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Wolverhampton home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Wolverhampton: questions
How long does installation take in Wolverhampton?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Wolverhampton home states the expected time.
How long does a heat pump survey take in Wolverhampton?
A home survey in Wolverhampton usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Wolverhampton house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Wolverhampton home.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.