- Area
- West Midlands
- Postcode district
- WV14
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Before you book: air source heat pump installation in Bilston
Every property in Bilston is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Many homes in Bilston have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows. Homeowners across the West Midlands can arrange a survey in Bilston for a room-by-room design and a written quote before committing to anything.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Households with room for a hot water cylinder
- Owners who want one contract covering design, fitting and paperwork
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Free home survey and room-by-room heat loss calculation
- System design, unit sizing and a written quote
- MCS registration and certificate, plus network operator notification
- Commissioning, handover and a walk-through of the controls
- Outdoor unit, hot water cylinder and weather compensation controls
In Bilston, cylinder space is planned with you, often in an airing cupboard, utility room or garage.
Grants and rules for heat pumps in England
Homes in Bilston can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for air source heat pump installation in Bilston
Here are typical prices for air source heat pump installation in the West Midlands, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Bilston
Bilston has about 7 hours 38 minutes of daylight at midwinter and 16 hours 51 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
The steps for air source heat pump installation in Bilston
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Bilston; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air source heat pump installation in Bilston: questions
Do you cover Willenhall as well as Bilston?
Yes. We arrange surveys and installation in Willenhall, which is about a mile north of Bilston, and across the West Midlands.
Do I need new radiators for a heat pump in Bilston?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Bilston home gives a room-by-room list.
Can you service a heat pump in Bilston that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Bilston, whoever fitted them. Tell us the make and model when you book.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.