- Area
- Aberdeenshire and Moray
- Postcode district
- AB43
- Nation
- Scotland
- Guide price
- From £2,450 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps in Fraserburgh: what to expect
Most homes can run on a heat pump if the system is designed properly, and Fraserburgh is no different. The key is matching the heat pump and radiators to the home's heat loss.
Top-floor rooms in Fraserburgh that overheat in summer gain from the cooling an air-to-air system provides. For terraced homes in Fraserburgh, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Homes where fitting radiators and pipework would be very disruptive
- Households that already have, or will add, a separate source of hot water
- Flats and apartments with storage or panel heaters
What's included
- Free survey covering rooms to heat, unit positions and hot water options
- Electrical supply and controls set up for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
- Condensate drains and neat external pipe covers
A survey in Fraserburgh covers indoor unit positions, pipe routes and hot water for homes across Aberdeenshire and Moray.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Fraserburgh can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
Air-to-air heat pumps costs around Fraserburgh
Here are typical prices for air-to-air heat pumps in Aberdeenshire and Moray, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,450–£5,150 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,100–£8,250 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Designing for Fraserburgh's winters
On the shortest day Fraserburgh gets only about 6 hours 32 minutes of daylight, with the sun around 9° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
What happens after you enquire in Fraserburgh?
- Start online with a guide price or call us.
- A home survey in Fraserburgh gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Fraserburgh: questions
How soon can you survey a home in Fraserburgh?
Survey dates depend on how busy installers are in Aberdeenshire and Moray. We offer the next available dates when you enquire and confirm them in writing.
How long does a heat pump survey take in Fraserburgh?
A home survey in Fraserburgh usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does a Fraserburgh home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Fraserburgh home.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.