- Area
- Clwyd
- Postcode district
- CH7
- Nation
- Wales
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
Before you book: air-to-air heat pumps in Mold
A heat pump suits most Mold homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
For terraced homes in Mold, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room. Installers in Mold plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Rooms that get too hot in summer as well as cold in winter
- Homes where fitting radiators and pipework would be very disruptive
- Households that already have, or will add, a separate source of hot water
What's included
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
- Electrical supply and controls set up for each room
- Condensate drains and neat external pipe covers
Top-floor rooms in Mold that overheat in summer gain from the cooling an air-to-air system provides.
Grants and rules for heat pumps in Wales
Homes in Mold can use the Boiler Upgrade Scheme, which applies in Wales as well as England: £7,500 towards an air source heat pump, or £9,000 when it replaces oil or LPG heating for installations from 21 July 2026 to 31 March 2027. The MCS-certified installer named in your quote applies and deducts the grant.
There is no VAT on installing a heat pump anywhere in the UK, Wales included, until 31 March 2027. Planning rules for heat pumps in Wales are set by the Welsh Government and differ from England's, so the surveyor checks the unit position against them.
What to budget for air-to-air heat pumps in Mold
Here are typical prices for air-to-air heat pumps in Clwyd, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,000 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,000–£8,000 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
How long is the heating season in Mold?
On the shortest day Mold gets about 7 hours 32 minutes of daylight, with the noon sun around 13° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
From survey to switch-on in Mold
- Start online with a guide price or call us.
- A home survey in Mold gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Mold: questions
How long does installation take in Mold?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Mold home states the expected time.
Do you cover Buckley as well as Mold?
Yes. We arrange surveys and installation in Buckley, which is about 2 miles east of Mold, and across Clwyd.
Can you service a heat pump in Mold that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Mold, whoever fitted them. Tell us the make and model when you book.
Is there a grant for air-to-air heat pumps?
In England and Wales, yes: the Boiler Upgrade Scheme includes a grant of £2,500 for air-to-air heat pumps in homes, from 28 April 2026. The MCS-certified installer applies to Ofgem and deducts it from your quote, subject to the scheme's conditions. The scheme does not cover Scotland or Northern Ireland; in Scotland, Home Energy Scotland has its own rules.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.