- Area
- County Antrim
- Postcode district
- BT39
- Nation
- Northern Ireland
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps in Ballyclare: what to expect
Most homes can run on a heat pump if the system is designed properly, and Ballyclare is no different. The key is matching the heat pump and radiators to the home's heat loss.
Extensions and garden rooms in Ballyclare that are hard to connect to the main heating can have their own air-to-air unit. For terraced homes in Ballyclare, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Flats and apartments with storage or panel heaters
- Homes where fitting radiators and pipework would be very disruptive
- Rooms that get too hot in summer as well as cold in winter
What's included
- Electrical supply and controls set up for each room
- Free survey covering rooms to heat, unit positions and hot water options
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
- Condensate drains and neat external pipe covers
Flats in Ballyclare on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
Grants and rules for heat pumps in Northern Ireland
Northern Ireland does not have a dedicated heat pump grant for homeowners at present, and the Boiler Upgrade Scheme does not apply here. Heat pumps have sometimes been funded through the Northern Ireland Sustainable Energy Programme, so it is worth checking what is open when you enquire about a home in Ballyclare.
There is no VAT on installing a heat pump in Northern Ireland until 31 March 2027, the same as in Great Britain. Planning and building control here follow Northern Ireland's own rules, so the survey checks the unit position against them.
Guide prices for air-to-air heat pumps in Ballyclare
The ranges below are typical installed prices for homes in County Antrim, including VAT. A survey sets the exact figure, because two similar-looking houses in Ballyclare can need quite different radiators and pipework.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,850 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,750 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Short winter days in Ballyclare and what they mean
On the shortest day Ballyclare gets only about 7 hours 13 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
From survey to switch-on in Ballyclare
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Ballyclare; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Ballyclare: questions
How long does installation take in Ballyclare?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Ballyclare home states the expected time.
Do you cover Antrim as well as Ballyclare?
Yes. We arrange surveys and installation in Antrim, which is about 8 miles south-west of Ballyclare, and across County Antrim.
How soon can you survey a home in Ballyclare?
Survey dates depend on how busy installers are in County Antrim. We offer the next available dates when you enquire and confirm them in writing.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.