- Area
- County Durham
- Postcode district
- DH9
- Nation
- England
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Stanley homes
Homes around Stanley range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
For terraced homes in Stanley, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room. Top-floor rooms in Stanley that overheat in summer gain from the cooling an air-to-air system provides.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Homes where fitting radiators and pipework would be very disruptive
- Rooms that get too hot in summer as well as cold in winter
- Households that already have, or will add, a separate source of hot water
What's included
- Free survey covering rooms to heat, unit positions and hot water options
- Electrical supply and controls set up for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Condensate drains and neat external pipe covers
- Outdoor unit and indoor units for each room
Flats in Stanley on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Stanley quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air-to-air heat pumps in Stanley
These are guide prices for County Durham, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,850 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,750 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
How long is the heating season in Stanley?
On the shortest day Stanley gets only about 7 hours 12 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
How installation works in Stanley
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Stanley; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Stanley: questions
How long does a heat pump survey take in Stanley?
A home survey in Stanley usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do you cover Chester-le-Street as well as Stanley?
Yes. We arrange surveys and installation in Chester-le-Street, which is about 5 miles east of Stanley, and across County Durham.
Can you service a heat pump in Stanley that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Stanley, whoever fitted them. Tell us the make and model when you book.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.