- Area
- Cumbria
- Postcode district
- CA11
- Nation
- England
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
Before you book: air-to-air heat pumps in Penrith
The question for a Penrith home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
A survey in Penrith covers indoor unit positions, pipe routes and hot water for homes across Cumbria. Flats in Penrith on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Rooms that get too hot in summer as well as cold in winter
- Homes where fitting radiators and pipework would be very disruptive
- Flats and apartments with storage or panel heaters
What's included
- Free survey covering rooms to heat, unit positions and hot water options
- Outdoor unit and indoor units for each room
- Electrical supply and controls set up for each room
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
Top-floor rooms in Penrith that overheat in summer gain from the cooling an air-to-air system provides.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Penrith quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air-to-air heat pumps prices in Penrith
Here are typical prices for air-to-air heat pumps in Cumbria, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,000 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,000–£8,000 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Short winter days in Penrith and what they mean
On the shortest day Penrith gets only about 7 hours 14 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
From survey to switch-on in Penrith
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Penrith home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air-to-air heat pumps in Penrith: questions
Where would the outdoor unit go on a Penrith house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Penrith home.
Do you cover Keswick as well as Penrith?
Yes. We arrange surveys and installation in Keswick, which is about 16 miles west of Penrith, and across Cumbria.
How long does a heat pump survey take in Penrith?
A home survey in Penrith usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.
Can air-to-air heat pumps cool as well as heat?
Yes. Most air-to-air systems can reverse their cycle to cool and dehumidify rooms in summer, which makes them useful for loft rooms, south-facing extensions and home offices that overheat. Cooling uses electricity, so running costs rise if it is used heavily. You control heating and cooling for each room separately.