- Area
- Cumbria
- Postcode district
- CA11
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing a gas boiler with a heat pump in Penrith
Every property in Penrith is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Rear gardens and side returns in Penrith usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours. Installers in Penrith take out the old boiler and flue and seal the wall opening as part of the job.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- System or regular boiler homes with an existing airing cupboard
- Combi owners who can find space for a hot water cylinder
What's included
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Capping of the gas pipe at the boiler position where you are giving up gas
- Heat pump cylinder, outdoor unit and weather compensation controls
- Free survey with heat loss calculation and cylinder siting
- Removal of the gas boiler, flue and any loft tanks
Households across Cumbria moving off gas can have a survey in Penrith that compares running costs on realistic assumptions.
Grants and rules for heat pumps in England
Homes in Penrith can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Gas boiler to heat pump costs around Penrith
Here are typical prices for replacing a gas boiler with a heat pump in Cumbria, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Penrith and what they mean
On the shortest day Penrith gets only about 7 hours 14 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
The steps for replacing a gas boiler with a heat pump in Penrith
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Penrith; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing a gas boiler with a heat pump in Penrith: questions
How soon can you survey a home in Penrith?
Survey dates depend on how busy installers are in Cumbria. We offer the next available dates when you enquire and confirm them in writing.
Can you service a heat pump in Penrith that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Penrith, whoever fitted them. Tell us the make and model when you book.
How long does a heat pump survey take in Penrith?
A home survey in Penrith usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.