- Area
- East Riding of Yorkshire
- Postcode district
- HU17
- Nation
- England
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps in Beverley: what to expect
Most homes can run on a heat pump if the system is designed properly, and Beverley is no different. The key is matching the heat pump and radiators to the home's heat loss.
A survey in Beverley covers indoor unit positions, pipe routes and hot water for homes across the East Riding of Yorkshire. Top-floor rooms in Beverley that overheat in summer gain from the cooling an air-to-air system provides.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Extensions, conservatories and garden rooms
- Households that already have, or will add, a separate source of hot water
- Rooms that get too hot in summer as well as cold in winter
What's included
- Free survey covering rooms to heat, unit positions and hot water options
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Electrical supply and controls set up for each room
- Outdoor unit and indoor units for each room
- Condensate drains and neat external pipe covers
Installers in Beverley plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Beverley quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for air-to-air heat pumps in Beverley
The ranges below are typical installed prices for homes in the East Riding of Yorkshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Beverley can need quite different radiators and pipework.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,900 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,850 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
How long is the heating season in Beverley?
On the shortest day Beverley gets only about 7 hours 24 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
From survey to switch-on in Beverley
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Beverley home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air-to-air heat pumps in Beverley: questions
Do you cover Hull as well as Beverley?
Yes. We arrange surveys and installation in Hull, which is about 8 miles south-east of Beverley, and across the East Riding of Yorkshire.
Do I need new radiators for a heat pump in Beverley?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Beverley home gives a room-by-room list.
What size heat pump does a Beverley home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Beverley home.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.