- Area
- East Riding of Yorkshire
- Postcode district
- HU17
- Nation
- England
- Main grant
- Boiler Upgrade Scheme, £7,500
- Survey
- Free for installation enquiries
What to know about heat pump grants in Beverley
In Beverley, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
For landlords with property in Beverley, we explain the funding position for each home before quoting. Oil and LPG-heated homes around Beverley can have their options set out alongside the cost of a full system.
Heat pump funding depends on which UK nation you live in, so we confirm what applies to your home and handle the grant steps alongside your quote.
- Homes in England and Wales on oil or LPG, where a higher grant applies between set dates
- Landlords in England and Wales, who can apply for their let properties
- Homeowners in England and Wales replacing gas, oil, LPG or electric heating
What's included
- Eligibility check for the scheme that covers your nation
- Boiler Upgrade Scheme application made by the MCS-certified installer (England and Wales)
- MCS certificate and handover documents after installation
- Written quote showing the full price and any grant deduction
- Installation scheduled around your grant confirmation or funding offer
Installation dates in Beverley are fixed around any funding confirmation, so work does not start too early.
Grants and rules for heat pumps in England
Homes in Beverley can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Grants and VAT across the UK
| Nation | Main support for heat pumps | Key points |
|---|---|---|
| England | Boiler Upgrade Scheme: £7,500 (£9,000 replacing oil or LPG, 21 July 2026 to 31 March 2027; £2,500 air-to-air) | MCS-certified installer applies; deducted from your quote |
| Wales | Boiler Upgrade Scheme: £7,500 (£9,000 replacing oil or LPG, 21 July 2026 to 31 March 2027) | Same scheme and rules as England |
| Scotland | Home Energy Scotland grant up to £7,500, plus up to £1,500 rural uplift; interest-free loan up to £7,500 | You apply; written offer needed before work starts |
| Northern Ireland | No dedicated heat pump grant for homeowners at present | Some heat pumps funded through NISEP in the past |
Heat pump installation is zero-rated for VAT across the UK, including Northern Ireland, until 31 March 2027. Scheme figures as at October 2026; check gov.uk, Ofgem or Home Energy Scotland before relying on them.
Designing for Beverley's winters
Beverley sees roughly 7 hours 24 minutes of daylight in December and 17 hours 07 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
What happens after you enquire in Beverley?
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Beverley; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat pump grants in Beverley: questions
How long does installation take in Beverley?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Beverley home states the expected time.
Do you cover Hull as well as Beverley?
Yes. We arrange surveys and installation in Hull, which is about 8 miles south-east of Beverley, and across the East Riding of Yorkshire.
How long does a heat pump survey take in Beverley?
A home survey in Beverley usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Who applies for the Boiler Upgrade Scheme?
In England and Wales, the MCS-certified installer applies to Ofgem for the Boiler Upgrade Scheme on your behalf, and the grant is deducted from your quote. Ofgem then contacts you as the property owner to confirm the details. Your quote names the MCS-certified installer for your job, so you know who is making the application.
Do I need an EPC for the Boiler Upgrade Scheme?
No longer. Since 28 April 2026, a valid EPC is not required for the Boiler Upgrade Scheme in England and Wales. The system must still meet the home's full heating and hot water needs, which the room-by-room heat loss calculation confirms. The other eligibility rules, such as owning the property, still apply.