- Area
- Kent
- Postcode district
- CT1
- Nation
- England
- Guide price
- From £2,450 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Canterbury homes
A heat pump suits most Canterbury homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Top-floor rooms in Canterbury that overheat in summer gain from the cooling an air-to-air system provides. Installers in Canterbury plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Rooms that get too hot in summer as well as cold in winter
- Flats and apartments with storage or panel heaters
- Homes where fitting radiators and pipework would be very disruptive
What's included
- Condensate drains and neat external pipe covers
- Free survey covering rooms to heat, unit positions and hot water options
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
- Electrical supply and controls set up for each room
A survey in Canterbury covers indoor unit positions, pipe routes and hot water for homes across Kent.
Grants and rules for heat pumps in England
Homes in Canterbury can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air-to-air heat pumps costs around Canterbury
Guide prices for Canterbury and the rest of Kent are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,450–£5,150 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,100–£8,250 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Winter daylight and heating in Canterbury
Canterbury sees roughly 7 hours 52 minutes of daylight in late December against 16 hours 36 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
The steps for air-to-air heat pumps in Canterbury
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Canterbury; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Canterbury: questions
What size heat pump does a Canterbury home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Canterbury home.
Can you service a heat pump in Canterbury that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Canterbury, whoever fitted them. Tell us the make and model when you book.
Do I need new radiators for a heat pump in Canterbury?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Canterbury home gives a room-by-room list.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.