- Area
- Merseyside
- Postcode district
- L32
- Nation
- England
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
Before you book: air-to-air heat pumps in Kirkby
In Kirkby, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Installers in Kirkby plan condensate drains and pipe covers so indoor and outdoor runs stay neat. Top-floor rooms in Kirkby that overheat in summer gain from the cooling an air-to-air system provides.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Flats and apartments with storage or panel heaters
- Homes where fitting radiators and pipework would be very disruptive
- Extensions, conservatories and garden rooms
What's included
- Electrical supply and controls set up for each room
- Condensate drains and neat external pipe covers
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Free survey covering rooms to heat, unit positions and hot water options
- Outdoor unit and indoor units for each room
Extensions and garden rooms in Kirkby that are hard to connect to the main heating can have their own air-to-air unit.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Kirkby quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air-to-air heat pumps costs around Kirkby
Here are typical prices for air-to-air heat pumps in Merseyside, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,850 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,750 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Short winter days in Kirkby and what they mean
Kirkby sees roughly 7 hours 28 minutes of daylight in December and 17 hours 02 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
The steps for air-to-air heat pumps in Kirkby
- Start online with a guide price or call us.
- A home survey in Kirkby gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Kirkby: questions
Where would the outdoor unit go on a Kirkby house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Kirkby home.
What size heat pump does a Kirkby home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Kirkby home.
Do I need new radiators for a heat pump in Kirkby?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Kirkby home gives a room-by-room list.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.