- Area
- Renfrewshire and Inverclyde
- Postcode district
- PA8
- Nation
- Scotland
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps in Erskine: what to expect
Every property in Erskine is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Installers in Erskine plan condensate drains and pipe covers so indoor and outdoor runs stay neat. Flats in Erskine on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Extensions, conservatories and garden rooms
- Households that already have, or will add, a separate source of hot water
- Rooms that get too hot in summer as well as cold in winter
What's included
- Free survey covering rooms to heat, unit positions and hot water options
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
- Electrical supply and controls set up for each room
- Condensate drains and neat external pipe covers
For terraced homes in Erskine, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For an Erskine home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Erskine property at survey.
Guide prices for air-to-air heat pumps in Erskine
These are guide prices for Renfrewshire and Inverclyde, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,000 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,000–£8,000 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Designing for Erskine's winters
Erskine has about 6 hours 58 minutes of daylight at midwinter against 17 hours 36 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
What happens after you enquire in Erskine?
- Start online with a guide price or call us.
- A home survey in Erskine gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Erskine: questions
Can you service a heat pump in Erskine that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Erskine, whoever fitted them. Tell us the make and model when you book.
How long does a heat pump survey take in Erskine?
A home survey in Erskine usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How soon can you survey a home in Erskine?
Survey dates depend on how busy installers are in Renfrewshire and Inverclyde. We offer the next available dates when you enquire and confirm them in writing.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.