- Area
- Glasgow and Dunbartonshire
- Postcode district
- G81
- Nation
- Scotland
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
What to know about air-to-air heat pumps in Clydebank
Most homes can run on a heat pump if the system is designed properly, and Clydebank is no different. The key is matching the heat pump and radiators to the home's heat loss.
Installers in Clydebank plan condensate drains and pipe covers so indoor and outdoor runs stay neat. Top-floor rooms in Clydebank that overheat in summer gain from the cooling an air-to-air system provides.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Homes where fitting radiators and pipework would be very disruptive
- Extensions, conservatories and garden rooms
- Rooms that get too hot in summer as well as cold in winter
What's included
- Free survey covering rooms to heat, unit positions and hot water options
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
- Condensate drains and neat external pipe covers
- Electrical supply and controls set up for each room
Flats in Clydebank on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Clydebank can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
Air-to-air heat pumps prices in Clydebank
Guide prices for Clydebank and the rest of Glasgow and Dunbartonshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,000 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,000–£8,000 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Designing for Clydebank's winters
On the shortest day Clydebank gets only about 6 hours 58 minutes of daylight, with the sun around 11° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
What happens after you enquire in Clydebank?
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Clydebank; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Clydebank: questions
How long does a heat pump survey take in Clydebank?
A home survey in Clydebank usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does a Clydebank home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Clydebank home.
Do I need new radiators for a heat pump in Clydebank?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Clydebank home gives a room-by-room list.
Can air-to-air heat pumps cool as well as heat?
Yes. Most air-to-air systems can reverse their cycle to cool and dehumidify rooms in summer, which makes them useful for loft rooms, south-facing extensions and home offices that overheat. Cooling uses electricity, so running costs rise if it is used heavily. You control heating and cooling for each room separately.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.