- Area
- Greater London
- Postcode district
- NW7
- Nation
- England
- Nearby
- Edgware, Finchley, Hendon
We cover Mill Hill and nearby Edgware, Finchley and the rest of Greater London. A heat pump is a whole-system change, so the survey looks at radiators, pipework, the hot water cylinder and the best spot for the outdoor unit.
Heat pump services in Mill Hill
All services in Mill Hill:
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Mill Hill quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pump guide prices in Mill Hill
Here are typical prices for an air source heat pump in Greater London, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,650–£14,000 | £3,150–£6,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,750–£15,100 | £4,250–£7,600 |
| 3 bedroom semi or small detached | 6–9 kW | £13,450–£17,350 | £5,950–£9,850 |
| 4 bedroom detached | 8–12 kW | £15,700–£20,150 | £8,200–£12,650 |
| 5+ bedroom or larger older house | 11–16 kW | £18,500–£25,200 | £11,000–£17,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Mill Hill
Mill Hill has about 7 hours 48 minutes of daylight at midwinter and 16 hours 40 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
Heat pumps in Mill Hill: questions
How long does installation take in Mill Hill?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Mill Hill home states the expected time.
Do you cover Edgware as well as Mill Hill?
Yes. We arrange surveys and installation in Edgware, which is about 2 miles west of Mill Hill, and across Greater London.
Do I need new radiators for a heat pump in Mill Hill?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Mill Hill home gives a room-by-room list.
How long does a heat pump survey take in Mill Hill?
A home survey in Mill Hill usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.