- Area
- Kent
- Postcode district
- TN24
- Nation
- England
- Nearby
- Tenterden, Hythe, Faversham
From Ashford out to Tenterden and Hythe, we arrange heat pump surveys, installation and aftercare across Kent. Each job is designed around the home's measured heat loss.
Heat pump services in Ashford
All services in Ashford:
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Ashford quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat pump guide prices in Ashford
Guide prices for Ashford and the rest of Kent are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £2,300–£5,400 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £3,300–£6,400 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £4,850–£8,450 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £6,900–£11,050 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £9,500–£15,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Ashford and what they mean
Ashford sees roughly 7 hours 53 minutes of daylight in late December against 16 hours 34 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
Heat pumps in Ashford: questions
How long does installation take in Ashford?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for an Ashford home states the expected time.
Where would the outdoor unit go on an Ashford house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Ashford home.
What size heat pump does an Ashford home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Ashford home.
How soon can you survey a home in Ashford?
Survey dates depend on how busy installers are in Kent. We offer the next available dates when you enquire and confirm them in writing.