- Area
- Buckinghamshire
- Postcode district
- SL7
- Nation
- England
- Guide price
- From £10,000 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing a gas boiler with a heat pump in Marlow
Every property in Marlow is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Installers in Marlow take out the old boiler and flue and seal the wall opening as part of the job. Households across Buckinghamshire moving off gas can have a survey in Marlow that compares running costs on realistic assumptions.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Combi owners who can find space for a hot water cylinder
- Households ready to give up gas entirely and drop the standing charge
- System or regular boiler homes with an existing airing cupboard
What's included
- Heat pump cylinder, outdoor unit and weather compensation controls
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Capping of the gas pipe at the boiler position where you are giving up gas
- System flush and radiator upgrades where the design calls for them
- Removal of the gas boiler, flue and any loft tanks
Semi-detached and terraced houses in Marlow often have an airing cupboard that can be reused for a heat pump cylinder.
Grants and rules for heat pumps in England
Homes in Marlow can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Gas boiler to heat pump prices in Marlow
Here are typical prices for replacing a gas boiler with a heat pump in Buckinghamshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,000–£13,150 | £2,500–£5,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,050–£14,200 | £3,550–£6,700 |
| 3 bedroom semi or small detached | 6–9 kW | £12,600–£16,300 | £5,100–£8,800 |
| 4 bedroom detached | 8–12 kW | £14,700–£18,900 | £7,200–£11,400 |
| 5+ bedroom or larger older house | 11–16 kW | £17,350–£23,650 | £9,850–£16,150 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Marlow's winters
Marlow sees roughly 7 hours 49 minutes of daylight in late December against 16 hours 39 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
What happens after you enquire in Marlow?
- Start online with a guide price or call us.
- A home survey in Marlow gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing a gas boiler with a heat pump in Marlow: questions
How long does installation take in Marlow?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Marlow home states the expected time.
Where would the outdoor unit go on a Marlow house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Marlow home.
What size heat pump does a Marlow home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Marlow home.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
Should I have my gas meter removed?
If gas is used for nothing else, removing the meter ends the gas standing charge, which is about £108 a year at the October to December 2026 price cap. If you still cook on gas or have a gas fire, you will need to keep the supply. Meter removal is arranged through your gas supplier, usually once the heat pump is running; the pipe at the boiler position is capped during the installation.